THE TORO COMPANY
Toro - spray head pop up sprinkler nozzle, Female thread, 10' - 60 degree arc
$11.12
List price, excluding tax
Some prices are discounted with an account. Request an account, or sign in to see yours.
9 options in this range.
Availability by branch Checking stockCurrent stock
KelownaChecking…
WestsideChecking…
BurnabyChecking…
VancouverChecking…
LangleyChecking…
CalgaryChecking…
KelownaOut of stock
WestsideOut of stock
BurnabyIn stock
VancouverIn stock
LangleyOut of stock
CalgaryIn stock here: 8'Out of stock
Toro Precision Series 10 ft 60° arc spray nozzle
A fixed-arc nozzle from Toro's Precision Series, designed to throw larger, more uniform droplets. Sized for a 10 ft radius, so it sits with the other 10 ft arcs on a zone.
Performance
- At 30 psi: 10.0 ft radius, 0.17 GPM
- Across 20 to 50 psi the chart runs 0.16 to 0.19 GPM
- Blue colour-coded top
Pairs well with
Spec sheets are under Downloads. Order at your trade pricing or pick up at ProSource in Kelowna, Westside, Burnaby, Vancouver, Langley or Calgary.
| Brand | Toro |
|---|---|
| Manufacturer part # | O-10-60 |
| Series | Precision Series spray nozzle |
| Radius | 10.0 ft (3.0 m) at 30 psi |
| Arc | 60° |
| Flow | 0.17 GPM at 30 psi |
| Colour code | Blue |
- CIT (Center for Irrigation Technology) approved
- Patented H2O Chip Technology™ generates larger, more uniform droplets, which results in consistency across the irrigated arc.
- Uses up to 35% less water to reach the radii of conventional spray nozzles
- All models are available with factory-installed Pressure Compensating Discs (PCD)
- Third-Party Performance Validation: Precision Series Spray nozzles have been tested and validated in the field and at the Center for Irrigation Technology (CIT).
- Optional Pressure Compensating Device (PCD): Maintains optimal performance even when inlet pressure rises to 40 psi and higher.
| Pressure | Radius (ft) | Flow (GPM) |
|---|---|---|
| 20 psi | 9.5 | 0.16 |
| 30 psi | 10.0 | 0.17 |
| 40 psi | 10.0 | 0.18 |
| 50 psi | 10.0 | 0.19 |
The sell sheet prints no unit for radius; it is read as feet.
