Hunter Industries
Hunter - Flow-Sync Flow Meter For Hunter Flow-Learning Controllers
$791.89
List price, excluding tax
Some prices are discounted with an account. Request an account, or sign in to see yours.
Availability by branch Checking stockCurrent stock
KelownaChecking…
WestsideChecking…
BurnabyChecking…
VancouverChecking…
LangleyChecking…
CalgaryChecking…
KelownaIn stock
WestsideOut of stock
BurnabyOut of stock
VancouverOut of stock
LangleyOut of stock
CalgaryOut of stock
Hunter Flow-Sync flow sensor for ACC2 and ICC2 controllers
A simple-insertion sensor that meters flow and reacts to high or low flow during irrigation. It is precalibrated for K-factor and offset by pipe size and drops into an FCT tee for the pipe.
Performance
- Works on pipe from 1" to 4"; operating range per pipe size is in the chart above
- Rated 0 to 220 psi with less than 1 psi pressure loss
- Cable runs up to 1,000 ft from the controller or sensor decoder
Pairs well with
- 1" Schedule 40 FCT tee (HUN-FCT-100)
- 1.5" Schedule 80 FCT tee (HUN-FCT-158)
- 2" Schedule 40 FCT tee (HUN-FCT-200)
- 2" Schedule 80 FCT tee (HUN-FCT-208)
Warranty: 5 years. Order at your trade pricing or pick up at ProSource in Kelowna, Westside, Burnaby, Vancouver, Langley or Calgary.
| Brand | Hunter |
|---|---|
| Manufacturer part # | HFS |
| UPC | 0611698146163 |
| Series | Flow-Sync sensor for ACC2 and ICC2 |
| Pressure range | 0 to 220 psi |
| Pressure loss | Less than 1 psi |
| Sensor wiring | 2 conductor direct burial, 18 AWG or greater, up to 1,000 ft (304.8 m) from the controller |
| Fitting required | FCT tee for pipe installation, sold separately |
| Warranty | 5 years |
- Simple-insertion flow sensor for metering and reacting to real-time flow conditions
- Provides station-level flow monitoring for reaction to high- or low-flow conditions, helping to protect against flood damage and erosion
- Compatible with Hunter ACC2 and legacy ACC and I-Core™ Controllers, as well as ICD-SEN Sensor Decoders, for flexible installation in a variety of settings
- Compatible with ICC2 Controllers via Centralus™ communication modules for system-level flow monitoring
- Easy connection up to 1,000' from controller or sensor decoder
- Sensor is precalibrated for K-factor and Offset based on pipe size, allowing for quick setup and programming within the controller
| Pipe size | Minimum (GPM) | Suggested maximum (GPM) |
|---|---|---|
| 1" | 2 | 17 |
| 1.5" | 5 | 35 |
| 2" | 10 | 55 |
| 3" | 28 | 120 |
| 4" | 34 | 195 |
