Store Locator Catalogue Quick Order Order Grid Sign in
Cart 0
Home / Catalogue / RB-XFSCV0918500
XF-SDI WITH HEAVY CHECK VALVE 0.9GPH 18" SPC 500FT
RAIN BIRD INTERNATIONAL INC.

XF-SDI WITH HEAVY CHECK VALVE 0.9GPH 18" SPC 500FT

SKU RB-XFSCV0918500 MPN X49212 Sold per 1
$573.93
List price, excluding tax
Sign in to order

Availability by branch Checking stockCurrent stock

KelownaChecking…
WestsideChecking…
BurnabyChecking…
VancouverChecking…
LangleyChecking…
CalgaryChecking…
KelownaOut of stock
WestsideOut of stock
BurnabyOut of stock
VancouverOut of stock
LangleyOut of stock
CalgaryOut of stock

Rain Bird XFS-CV 0.9 GPH 18 in spacing dripline with check valve, 500 ft coil

Copper Shield dripline with a built-in heavy-duty check valve for hills and slopes, so water does not drain to the low point and puddle. Use it on the surface or below grade.

Performance

  • 0.9 GPH emitters every 18 in
  • Longest lateral at 30 psi: 337 ft
  • Runs on 20 to 60 psi; needs 120 mesh filtration
  • 4.3 psi check valve holds the line charged through up to 10 ft of elevation change

The spec sheet is under Downloads. Order at your trade pricing or pick up at ProSource in Kelowna, Westside, Burnaby, Vancouver, Langley or Calgary.

BrandRain Bird
Manufacturer part #XFSCV0918500
SeriesXFS-CV dripline with Copper Shield and heavy-duty check valve
ApplicationOn surface or sub-surface
Emitter flow0.9 GPH (3.5 L/h)
Emitter spacing18 in (45.7 cm)
Pressure compensatingYes
Pressure range20 to 60 psi (1.38 to 4.14 bar)
Outside diameter0.634 in (16 mm)
Inside diameter0.536 in (13.6 mm)
Wall thickness0.049 in (1.2 mm)
Coil length500 ft (152.4 m)
Required filtration120 mesh
TemperatureWater up to 100°F (37.8°C), ambient up to 125°F (51.7°C)
Check valve4.3 psi (0.3 bar), keeps the line charged over elevation changes up to 10 ft (3 m)
Opening pressure14.5 psi (1.0 bar)
FittingsStainless steel clamps recommended on 17 mm insert fittings above 50 psi design pressure
Shipping weight18.9 lb
  • Rain Bird’s patent-pending 4.3 psi check valve technology keeps the dripline charged with water at all times, increasing uniformity of watering, and conserves water by eliminating the need to recharge the line at the beginning of each watering cycle
  • XFS-CV Sub-Surface Dripline emitters are protected from root intrusion by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a system that does not require maintenance or replacement of chemicals to prevent root intrusion
  • Rain Bird’s low-profile emitter design reduces in-line pressure loss, allowing longer lateral runs, simplifying design and reducing installation time
  • Variety of standard emitter flow rates, emitter spacing and coil lengths provide design flexibility for sub-surface and on-surface areas with or without elevation changes
  • Through the use of a proprietary tubing material, the XFS-CV Dripline with heavy-duty check valve is the most flexible dripline tubing in the industry, making it the easiest dripline to design with and install
  • All Rain Bird XF Dripline (XFD, XFS, XFCV, XFS-CV) qualify for LEED credit 4.2 because they contain at least 20% Polyethylene post consumer recycled material by cost. These come in an assortment of coil sizes, flow rates and emitter spacing
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 20 to 60 psi
  • Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage
  • Rain Bird’s proprietary emitter design resists clogging by use of an extra wide flow path combined with a self-flushing action
Maximum lateral length (ft) by pressure
PressureMax lateral length (ft)
20 psi215
30 psi337
40 psi416
50 psi477
60 psi529

Based on 18 in emitter spacing and nominal flow 0.9 GPH.

Spec sheet XFS-CV Tech Spec PDF · 358 KB